Multitech FaxFinder FF200 Quick Start Manual page 6

Getting Started Multi-Tech FaxFinder Quick Start
Each fax-dedicated PBX extension number is associated with a
particular email address. Fax clients on the network can send
faxes directly from their PCs using any application program that
can print. In response to the 'Print' command, the FF200 turns
the 'print file' image into a fax. It transmits the fax to the public
phone system (PSTN) or to another PBX extension.
POTS Mode. When connected directly to a regular POTS line
(or to a PBX without convergent routing capability), the FF200
functions as an outgoing fax server with incoming fax service to
an attendant. Outgoing faxes work the same as in PBX Routing
Mode. That is, to send a fax into the public phone system
(PSTN), the client software executes a print-to-file command
from an application program. However, all incoming faxes go to
a single email recipient, the attendant, who then sends them on,
as needed, to the intended recipient.
In both configurations, the FF200, having two fax ports, can
send and receive faxes simultaneously.
6