Network Share Fields; Using A Server Certificate; Upload A Server Certificate; Generating A Server Certificate - Multitech FaxFinder FF240 Administrator's Manual

BASIC FAXFINDER CONFIGURATION
3. Click Add and enter your network folder information. Refer to Network Share Fields for details.
4. Click Save. Network Share updated appears at the top of the page.

Network Share Fields

FaxFinder's factory default IP address is 192.168.2.1 and 24 bit network mask is 255.255.255.0.
Field
UNC/Location
Username
Password
Confirm Password

Using a Server Certificate

FaxFinder allows you to upload or generate a server certificate.

Upload a Server Certificate

The server certificate file must be named server_cert.pem. FaxFinder requires a certificate that is a combined
private key and certificate file with the following sections:
-----BEGIN PRIVATE KEY-----
.
.
-----END PRIVATE KEY----
-
-----BEGIN CERTIFICATE-----
.
.
-----END CERTIFICATE-----
To upload a certificate:
1. Click System Configuration > Certificates.
2. Click Upload.
3. Browse to your certificate.
4. Enter certificate information. Refer to Server Certificate Parameters for details. The values you enter are
for identification purposes only.
5. Click Save. You will be prompted to reboot FaxFinder.
6. Reboot FaxFinder.

Generating a Server Certificate

Because FaxFinder uses a self-signed website certificate, your browser will show a certificate error and warning.
Ignore the warning or, depending on your browser, add an exception or add your FaxFinder IP address to your
trusted sites.
30
Description
Enter the Universal Naming Convention identifier or network location of up to 50
characters, for example, //server/service or \\server\service.
Enter a username that has write access to the shared location. This can be a general
account or one specific to the shared folder.
Enter the password associated with the above username.
Re-enter the password in order to avoid possible errors.
®
FaxFinder Fax Server FF240, FF440, FF840 Administrator Guide