Table of Contents
Advertisement
DSU ProxyServer User Guide
Loading the Proxy Server Software
The following loading procedure does not provide every screen or option in the process of
installing the ProxyServer software. The assumption is that a technical person is doing the
installation and that a thorough knowledge of Windows and the software loading process is
understood. Additional information on the ProxyServer software is provided in
Server
Software, as well as in the on-line help system provided with the software.
1.
Run Windows on the PC connected to the Command Port.
2.
Insert the ProxyServer diskette labeled Disk 1 into the disk drive on the PC connected to
the Command port.
3.
Win3.1 users - access the setup program in the File Manager by clicking File | Run. In
the Run dialog box, type a:\setup or b:\setup (depending on the location of your floppy
disk drive) in the Command Line field and then click OK.
Win95 users - click Start | Run. In the Run dialog box click on the down arrow and
choose a:\setup or b:\setup (depending on the location of your floppy disk drive) in the
Command Line field and then click OK.
4.
Follow the on-screen instructions to install your ProxyServer software.
18
Chapter 4 - Proxy
Advertisement
Table of Contents
