Technical Specifications; Technical Data - corob PROsample 200 User Manual

8 TECHNICAL SPECIFICATIONS

8.1 Technical data

Power supply
Frequency
Fuses (a)
Maximum power absorbed (a)
Noise level
Environment working conditions (b)
Vibrations
Dispensing technology
Circuit flow rate with Standard pump
Circuit flow rate with LAB pump
Nozzle center flow diameter (c)
Dispensing system
Dispensing center
Type of canisters
Type of valves
(a) The power information is purely indicative, and depends strictly on the machine configuration.
(b) The environment working conditions are strictly related to the type of colorants used (ask for information from the paint manufacturer). The data shown are valid
for the machine only.
(c) Hole diameter for pre-punched cans = flow diameter + 15 mm (0.59").
D200
CE: Single-phase 100 - 240 V~ ± 10%
150 W
Level of equivalent acoustic pressure: < 70 dB (A)
Temperature: between 10 °C (50 °F) and 40 °C (104 °F)
Relative humidity: between 5% and 85%, without condensation
The machine does not transmit vibrations to the floor that may compromise the
stability and precision of any nearby equipment.
0.2 l/min
\
Sequential
All-purpose (POM acetalic resin)
- 41 -
D200 4G
ETL: Single-phase 100 - 120 V
50/60 Hz
F 10 A
150 W - sequential
180/250 W - simultaneous or mixed
Bellow pump
\
31 mm (1.22")
Sequential and/or simultaneous
Internal
Check valves
PROsample 200
\
0.05 l/min
COROB D200