Table of Contents
Advertisement
WARNING
Disconnect power to the unit before servicing following all lock out\tag out procedures established
by the user.Verify all power is off to the unit before performing any work.
Failure to comply could result in serious injury,death or damage to the equipment.
WARNING
Water and CO2 to the system must be turned off and the system depressurized prior to performing
this service.
Failure to comply could result in serious injury,death or damage to the equipment.
WARNING
or its service agent or a similarly qualified person in order to avoid a hazard.
P
C
OWER
ORD
1. Disconnect power to the unit.
2. Remove the following:
– Top cover by removing
– key switch wires
3. Remove second valve from the left to facilitate routing of the new cord.
4 A. Route the new power cord
along the same path as the old
one (removing the old cord as
you go).
4 B. First route the new cord up
behind the valve panel and
through the cutout in the pump
deck. Use the already
attached wire tie/fastener on
the deck to secure the cord.
4 C. Connect cord to the receptacle
on the refrigeration deck.
© 2010, IMI Cornelius Inc.
--
If the supply cord is damaged,it must be replaced by the manufacturer
R
EPLACEMENT
screws on the top and lifting
up
Route Cord Up
and Behind
Valve Panel
Plug Cord into
Receptacle
- 38 -
Cord
Fastener
Advertisement
Table of Contents
