ALLIANCE 030 Series Installation Manual page 3

Installation must conform with local codes or, in the absence of
local codes, with:
In the U.S.A., installation must conform to the latest edition of
the American National Standard Z223.1/ NFPA 54 "National
Fuel Gas Code" and Standard ANSI/NFPA 70 "National Electric
Code."
In Canada, installation must comply with Standards CAN/CSA-
B149.1 Natural Gas and Propane Installation Code and CSA
C22.1, latest edition, Canadian Electric Code, Part I.
In Australia and New Zealand, installation must comply with the
Gas Installations Standard AS/NZS 5601 Part 1: General Installa-
tions.
In Europe, before installation, check that the local distribution
conditions, nature of gas and pressure, and the adjustment of the
appliance are compatible.
This equipment has been designed and certified to comply with
IEC/EN 60335 electrical safety standards for tumble dryers.
Read all instructions before using tumble dryer.
IMPORTANT: If it is unavoidable that fabrics that con-
tain vegetable or cooking oil or have been contaminat-
ed by hair care products be placed in a tumble dryer,
they should first be washed in hot water with extra de-
tergent. This will reduce, but not eliminate, the hazard.
FOR YOUR SAFETY, the information in this manual
must be followed to minimize the risk of fire or ex-
plosion or to prevent property damage, personal in-
jury or death.
Electric shock hazard will result in death or serious
injury. Disconnect all electric power to appliance and
accessories and wait five (5) minutes before servic-
ing.
Units are IPx4 when enclosed per these instructions.
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
WARNING
DANGER
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
• WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all occu-
pants.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's in-
structions.
• If you cannot reach your gas supplier, call the
fire department.
• Installation and service must be performed by a
qualified installer, service agency or the gas sup-
plier.
IMPORTANT: Information must be obtained from a lo-
cal gas supplier on instructions to be followed if the
user smells gas. These instructions must be posted in
a prominent location. Step-by-step instructions of the
above safety information must be posted in a promi-
nent location near the tumble dryer for customer use.
IMPORTANT: Post the following statement in a promi-
nent location
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appli-
W033
ance.
IMPORTANT: The installer must fully test the tumble
dryer after installation and demonstrate to the owner
how to operate the machine.
IMPORTANT: The machine shall only be installed in a
room separated from inhabited rooms, incorporating
appropriate ventilation specified in the National Instal-
lation Regulations.
W925
IMPORTANT: The tumble dryer is not to be used if in-
dustrial chemicals have been used for cleaning.
3
WARNING
Part No. 70686701ENR4
W052