Motorola iM1000 User Manual page 44

iM1000-Data Modem
14. Make sure that the "Type of Dial-Up Server" is
PPP :Windows 95, Windows NT 3.5, Internet.
15. Make sure that the selection box next to "TCP/IP" is checked. Remove
the check marks from all other selection boxes.
To remove a check mark, click on it.
16. Click "TCP/IP Settings". The TCP/IP Settings window opens.
Figure 54. TCP/IP Settings Window
Your iDEN carrier provides your Primary and Secondary DNS IP
addresses.
17. Make sure that the selection button next to "Specify an IP address" is
selected.
18. Enter the IP address for the modem.
19. Make sure that the selection button next to "Specify name server
addresses" is selected.
20. Enter the Primary DNS IP address provided by your iDEN carrier.
21. (Optional) Check the selection box next to "Use IP Header
Compression".
22. Make sure that the selection box next to "Use default gateway on
remote network" is checked.
23. Continue clicking "OK" to return to the Dial-Up Networking window,
then close it.
40