Setting Up Windows Components; Verifying And Installing Dial-Up Networking - Motorola iM1000 User Manual

Data modem
Hide thumbs Also See for iM1000:
Table of Contents

Advertisement

iM1000-Data Modem
SETTING UP WINDOWS
COMPONENTS
The Installation software automatically installs the packet data application
on your IBM PC-compatible computer with Windows installed.
Windows must have Dial-Up Networking Version 1.3 or later and the TCP/
IP protocol installed.
If your version of Dial-up Networking is earlier than
Version 1.3, you can go to the Microsoft™ web site,
www.microsoft.com, to get the upgrade.
• If Dial-Up Networking and the TCP/IP protocol are installed, skip this
section and go to "Installation Instructions" on page 16.
• If you are not sure if they are installed, or if they are not installed,
proceed with the rest of these instructions.
If your computer has a network card or a security program
that prevents IP address changes, see your system
administrator before attempting to install this program.
If your computer is connected to a network, be sure not to
remove the existing network protocols during Packet Data
installation.

Verifying and Installing Dial-Up Networking

This section provides the procedure for setting up Dial-Up Networking on
your Windows computer.
Make sure that your Windows installation media (CD) is available. You may
be asked to insert it later in the installation procedure.
1. From your Windows desktop, double-click "My Computer".
2. Double-click "Control Panel".
3. Double-click "Add/Remove Programs". The Add/Remove Programs
Properties window opens.
4. Click the Windows Setup tab.
10
N O T E
I M P O R T A N T

Advertisement

Table of Contents
loading

Table of Contents