Related Software; Online Service Software; Configuring Communications Software - Motorola iM1000 User Manual

iM1000-Data Modem

RELATED SOFTWARE

This section provides information about:

• Online service software

• Configuring communication software
Online Service Software
Online service software is distributed by an Internet Service Provider (ISP),
a fee-based online subscription service, such as IBM
® ®
AOL , or Prodigy .
To connect to an online service with online service software:
1. Install the software provided by your online service.
2. Connect your modem to the computer and make sure both are turned
on.
3. Start your online software.
For instructions, see the information that came with your online
service software.
4. When your computer displays the message,
network and start using the online service.
Configuring Communications Software
For achieving peak operating efficiency with your modem during circuit-
switched data use, configure your communication software according to the
instructions provided below. Note that these instructions are application-
specific.
PROCOMM PLUS for Windows 4.0
Before you install PROCOMM PLUS, modify the "pw2.ini" file in the
Windows directory and type the following lines under "[options]":
faxlockedrate=19200
fbor=12T
To configure for data modem:
1. In your communication software, select "Setup" on the menu bar, then
select "Setup..." The Current Setup window opens.
2. Click the "Data Modem/Connection" icon.
a. Select "Connection Setup".
(1) Set the default baud rate to 19200.
(2) From the Selected Port listing, choose the port to which the
modem is connected.
(3) Click the selection box next to "Use Hardware Flow Control".
(4) Select "Install New Modem or Connection" then select
"Generic Hayes-Compatible 2400 (no fax)".
60
®
Internet Access,
, log on to the
CONNECT