Installing The Dial-Up Adapter - Motorola iM1000 User Manual

Data modem

Hide thumbs Also See for iM1000:

Table of Contents

Installing the Dial-Up Adapter

When you select "TCP/IP Protocol", you are asked to select a network

adapter. If you receive a message that you do not have one installed, use the

following procedure to install one. If you have a Dial-Up Adapter installed,

skip this section and go to "Installation Instructions" on page 16.

Figure 12. Select Network Adapter Window

1. At the Select Network Adapter window, under Network Adapters,

highlight "Dial-Up Adapter".

2. Under Manufacturers, highlight "Microsoft".

3. Click "OK". The Select Network Component Type window opens.

Figure 13. Select Network Component Type Window

4. Highlight "Adapter" then click "Add". The Select Network Adapters

window opens.

5. To verify that the adapter was added, from the Control Panel, click

Network. Look for "Dial-Up Adapter" on the Network Conﬁguration

screen.

Setting Up Windows Components

Table of Contents