Creating A Dial-Up Networking Connection In Windows - Motorola iM1000 User Manual

iM1000-Data Modem
Creating a Dial-Up Networking Connection in
Windows
The setup program attempts to create the dial-up networking connection
automatically. However, some versions of Windows 95 require that you
create it manually. If you get such a message, use the following procedure.
If you do not have to create a dial-up networking connection, proceed to
"Starting the Internet Connection" on page 45.
To create a packet data connection:
1. Be sure that your computer has Dial-Up Networking and TCP/IP
installed. (For more information, see "Verifying and Installing Dial-
Up Networking" on page 10 and "Verifying and Installing the TCP/IP
Protocol" on page 13.)
2. From your Windows desktop, double-click "My Computer".
Figure 46. My Computer
3. Double-click "Dial-Up Networking". The Dial-Up Networking
window opens.
Figure 47. Dial-Up Networking Window
36