Advanced Mode - Motorola iM1000 User Manual

iM1000-Data Modem

Advanced Mode

To open the Advanced Mode window:
1. From the Normal mode window, click "Mode".
2. Click "Advanced". The Advanced Mode window opens.
Figure 64. iDEN Status Window - Advanced
The following information is displayed:
Carrier The hexadecimal equivalent for the carrier
number of a cell
No.
Color The hexadecimal value for the carrier color
code
Code
SQE The decimal value for the Signal Quality
Estimate in decibels (dB)
RSSI The value that represents the signal strength
power received in dBm units.
Advanced mode also has a pop-up menu. To access the pop-up menu, click
your right mouse button in the status window.
The menu choices are:
Normal Click to view the basic information for your
modem.
Help Click to get help for the status window panel.
About Click to get product information, such as
manufacturer, software name and version,
copyright and licensing information.
Disconnect Click to disconnect and exit the program.
& Exit
If you see the following status message:
CANNOT COMMUNICATE WITH MODEM
the computer does not recognize the IP address of the modem. If the IP
address conflicts with the one given to you by your iDEN carrier, run the
configuration program to synchronize the IP addresses. See "Configuring
Your Modem" on page 28.
50
...