Connecting To The Internet Via Circuit-Switched Data - Motorola iM1000 User Manual

iM1000-Data Modem
Connecting to the Internet via Circuit-Switched
Data
Circuit-switched data communications use AT commands, which are issued
by your computer to your modem or, during fax transmissions to the modem
at the other end of the connection.
AT commands refer to Hayes®-compatible modem commands.
Make sure you have a Motorola iDEN data-enabled modem definition
installed. For more information, see "Configuring Your Modem" on
page 28.
To make a circuit-switched data connection:
1. From your Windows 95, desktop, double-click "My Computer".
Figure 66. My Computer Window
2. Double-click "Dial-Up Networking". The Dial-Up Networking
window opens.
Figure 67. Dial-Up Networking Window
52