Troubleshooting - PROEMION CANlink mobile 3000 Series Device Manual

¬ The ON LED lights up green.
¬ The STATUS LED lights up blue.
¬ The device has adopted the firmware defaults (CAN Baud Rate 250 kbit/s, CANopen Node ID 39 etc.).
INFORMATION

You can restore the factory configuration of the device using object 0x1011, subindex 0x01.
INFORMATION

When a Factory Reset is being performed, the ON LED flashes in a magenta color and the Status
LED orange. For more information on the LED status indications, see Chapter
You can find a tutorial on how to perform a factory reset in the download section of our website. See also
Chapter Service and

7. Troubleshooting

This chapter contains information on solving problems and on maintenance.
WARNING
Risk of fatal injury due to electric shock!

Risk of severe or fatal injury.
- Never carry out repairs to the device yourself. Contact our support. The device does not contain
any parts that can be repaired or maintained by the user.
NOTICE
Risk of property damage.

A defective device must be inspected and repaired by a trained Proemion service technician.
- Do not open the device housing yourself.
CANlink mobile 3000 Device Manual
Support.
Indicator Elements.