Logging Mode - PROEMION CANlink mobile 3000 Series Device Manual

6.2. Logging Mode

In Logging mode, the device logs CAN messages, GNSS data, and internal variables.
All the recorded data is saved in an internal, nonvolatile memory and automatically sent to the DataPlatform when a
connection is available.
NOTICE

The internal nonvolatile memory also stores recorded data as *.CLF-files. The maximum number
of files which can be stored on the internal memory is 4000 files with a file size up to 1 KB. When
the total of 4000 files is reached, newly saved files will overwrite the oldest file.
NOTICE

After the first initialization, the device is automatically in Logging mode. If it is then switched to
RealTime mode, the device remains in RealTime mode after a restart.
NOTICE
Before you start logging data, check the device status in the machine overview in the DataPortal.
The device must be in Logging mode.

The colored dot in the machines list indicates the status:
* Grey – device is offline
* Green – device is in Logging mode
* Blue – device is in RealTime mode
To change the device mode, go to the machine details page, click Manage ¬ Advanced Functions
¬ Device mode
For further information on the DataPortal functionality, refer to the
CANlink mobile 3000 Device Manual
Document Library.