Realtime Mode - PROEMION CANlink mobile 3000 Series Device Manual

6.3. RealTime Mode

In RealTime mode, CAN messages are transmitted bidirectionally.
CAN messages and GNSS data can be transmitted close to RealTime.
Alternatively, the device can use a WLAN or Bluetooth connection to receive and transmit data from an external
receiver, e.g. the CANlink wireless.
Configuration is done with the Proemion Configurator. The basics are described in Configuring.
NOTICE
Before starting RealTime transmission, check the device status in the machine list in the
DataPortal.
The colored dot in the Machines list indicates the connection status:

- grey - device is offline
- green - device is in Logging mode
- blue - device is in RealTime mode
¬ To change the device mode, go to the machine details page, click Manage ¬ Advanced
Functions ¬ Device mode
For further information on the DataPortal functionality, refer to the DataPortal
CANlink mobile 3000 Device Manual
DataPortal User Manual.