5.8. Connecting the Device to the DataPlatform
Before starting the device for the first time, you must connect it to the DataPlatform.
1. Connect the power supply unit with the power connector of the start cable for main plug connector cable.
2. Plug the power supply unit into the mains power supply.
¬ The ON LED lights up in constant green.
¬ The STATUS LED flashes green.
3. Wait until the STATUS LED lights up continuously.
¬ The device is now connected to the DataPlatform.
4. Log into the
DataPortal
5. If your device does not appear in the machine overview, you must
CANlink mobile 3000 Device Manual
and check that the device is connected to the DataPlatform.
activate
the device first.