Checking the Components and Setup
007-6471-001
Figure 3-4
Accessing the Inside of the Chassis
You may have one or two processors already installed into each of the serverboards. Ensure that
the serverboards are populated per your order. See
Your server system comes with system memory already installed. Make sure all DIMMs are fully
seated in their slots.
Ensure that all power and data cables are properly connected and not blocking the chassis airflow.
Also, make sure that no cables are positioned in front of the fans.
Check the Serverboard Setup
"Independent Nodes" on page
7.
25
Need help?
Do you have a question about the Rackable C2112-4KL1 and is the answer not in the manual?
Questions and answers