Firmware And Features - Marport CATCH User Manual

Mx receiver firmware
Dock
This section describes the firmware and features that must be configured on MASP to
set up the sensor.
To be operational, the sensor needs to be configured with two files:
• a firmware file (*.A2F): it is the firmware of the sensor,
• an application file (*.A2A): it defines the sensor features and options.
These files are generated via MASP.
The latest version of the firmware is available for download on MASP.
Compatibility: F450-02.02.02 and after
The features and options are configurable according to the type of hardware and
customer's choices.
Features
Sounding Options
Misc. options
08.05.03 or later
01.01.01 or later

Firmware and Features

Firmware
Features and Options
Catch Navigator | V1 |
Introduction and Presentation
• Product name: Manually entered.
• Application: Catch Navigator
• Body: Small
• Battery capacity (not configurable): 1-
pack
• Down
• Down2
• SD Card Log: records a log of the sen­
sor activity. This option is useful for trou­
bleshooting support.
• High Resolution (always activated)
8