Marport CATCH User Manual page 14

1. Connect one Dock charging plug to the sensor's endcap.
2. Mosa2 discovery page opens. The sensor is displayed.
Simply connect the Configuration Cable from the computer to the sensor to display the
sensor configuration page on Mosa2.
Tip: Refer to the Configuration Cable Quick Reference Guide for more details
about the use of this product.
1. Move other electrical devices minimum 1 m away from the computer.
2. Connect the USB connector directly to the computer.
Using the Configuration Cable
Catch Navigator | V1 | Sensor Configuration
◦ Click
to open the sensor
configuration page.
◦ Click to show the deploy
animation on the charger plug
for 30 seconds.
14