Marport CATCH User Manual page 30

1. Go to the Communication page, then click
2. Activate Additional support Log.
The last 99 recorded sensor data files and last 99 battery files are displayed. Two types
of files are on the SD card:
• Files containing measures recorded by the sensor. Their name begins by "450".
These data are more precise and recorded more often than data received on
the receiver. One file corresponds to a tow (time between entering and leaving
water). The recording date displayed in the second column is synchronized with
your computer time.
• BATT = Files created when the sensor is charging (1 file per charging cycle). They
are useful for support teams for troubleshooting.
Note: The first time the sensor connects to Mosa2 or if the sensor
desynchronizes, a clock with a warning icon
Click it to synchronize the time of the SD card with the computer's time.
1. Press command + E or click Menu
2. On the first page, click
Getting data from the SD card
and click User Mode > Expert.
in SDCard Record.
Catch Navigator | V1 | Sensor Configuration
in Recording.
is displayed in the top toolbar.
30