You can also check the battery level at anytime from the top bar:
Note: When you change settings such as the uplink power or sounding
range, it affects the battery consumption and remaining lifetime. The battery
information will update after the sensor has been switched on and operating
for 10 minutes.
Scala2 and Mosa2 applications warn the user in case of water ingress in the sensor.
Note: Diagnostic information is available for Marport Pro sensors (A2S and A2H
PCBA versions), from the firmware version F450-02.02.00 or later and Mosa2
version 02.11.08.
Diagnostic Information
Catch Navigator | V1 | Sensor Configuration
17