Appendix; Frequency Plan - Marport CATCH User Manual

Appendix

Frequency Plan

It is important to carefully plan the setup of your sensors before adding them to the
system. You can create a table with a list of frequencies and complete it when you add
sensors.
Frequencies and intervals
The diagrams below show the bandwidth of the different types of Marport sensors and
intervals you must respect when adding other sensors.
Figure 1. PRP sensors (e.g. Catch sensor, Trawl Speed, Spread sensor...)
Example: If the frequency of the sensor is 40kHz, there should be no sensors between
39.9-40kHz and 40-40.1kHz.
Figure 2. Marport Pro sensors (e.g. Trident, Door
Explorer, Trawl Navigator, Speed Navigator)
Example: If the frequency of the sensor is 40kHz, there should be no sensors between
39.8-40kHz and 40-50.2kHz.
60
Catch Navigator | V1 | Appendix