Bacnet - Grundfos CIM 300 User Manual

1.6 BACnet

A Grundfos Level Control LC 2X1 can be connected to two
wastewater pumps,while a Grundfos Level Control LC 2X2 can be
connected to two submersible pumps. LC units provide status
information, as well as control and monitoring for a wastewater pit
or submersible pump via an operating panel.
1.6.1 BACnet MS/TP, CIM 300
CIM 300 is an add-on communication module that can be installed
in an LC 2XX using a 10-pin connector. This enables
communication with a PLC, SCADA system, etc.
Via the BACnet MS/TP connection, it is possible to control the
system and read status, measured values, etc.
LC 2X1
BACnet
MS/TP
1
CIM 300 solution for LC 2X1. One or two pumps can be
connected.
Pos. Description
1 Digital and analog input/output
LC 2X2
BACnet
MS/TP
1
CIM 300 solution for LC 2X2. One or two pumps can be
connected.
Pos. Description
1 Digital and analog input/output
6
1.6.2 BACnet IP, CIM 500
CIM 500 is an add-on communication module that can be installed
in an LC 2XX using a 10-pin connector. This enables
communication with a PLC, SCADA system, etc.
It is possible to control the system over the BACnet IP connection
and read status, measured values, etc.
CIM 300
CIM 500 solution for LC 2X1. One or two pumps can be
connected.
CIM 300
CIM 500 solution for LC 2X2. One or two pumps can be
connected.
LC 2X1
BACnet
IP
1
Pos. Description
1 Digital and analog input/output
LC 2X2
BACnet
IP
1
Pos. Description
1 Digital and analog input/output
CIM 500
CIM 500