Multistate Inputs; Multistate Outputs - Grundfos CIM 300 User Manual

5.4 Multistate inputs

Binary objects that provide information from a Grundfos pump.
ID Object name
MI, 0 System Operating Mode
MI, 1 CIM status
MI, 2 System status
MI, 3 System control sensor type

5.5 Multistate outputs

Objects that contain an enumeration value from the pump.
ID Object name
MO, 0 Control Pump 1
MO, 1 Control Pump 2
R/W Description
0: Standby
1: Start-up delay
2: Pumping
3: Stop delay
4: Pumping max
5: Stopped
6: Foam draining
7: Daily emptying
R
8: Pump antiseizing
9: Manual control
10: Interlock control
11: Mains failure
12: Level sensor error
13: All pumps in alarm
14: All pumps out of operation
15: Service mode, alarms suppressed
1: OK
2: EEPROM fault
R
3: Memory fault
4: Unknown
STATUS_MAIN_STATUS reported by bits 0-2.
Possible values:
1: System OK
R
2: Warnings present
3: Alarms Present
4: Unknown
Reports the type of sensor controlling the system.
Possible values:
R 1: Analog level sensor
2: Float switch
3: Unknown
R/W Description
1: Auto
W 2: Forced start
3: Forced stop
1: Auto
W 2: Forced start
3: Forced stop
LC 2X1 LC 2X2
● ●
● ●
- ●
● ●
LC 2X1 LC 2X2
● ●
● ●
17