Procedure C1: Assembly / Disassembly Barrel / Handle - Sames Inocoat Inogun M Instruction Manual

6.4.3. Procedure C1: Assembly / Disassembly barrel / handle

• Step 1: Unscrew the 4 screws at the back of the gun.
• Step 2: Separate the handle from the barrel by
simultaneously making small horizontal and vertical
movements.
• Step3: Remove the connector (1) from the cable
guide clip (P/N: 900020680) (2) and disconnect the
connector from the HVU.
• Handle and barrel are separated.
29
DRT7132
D - 2022 /09
1
2
Member of Exel group