Procedure For Mounting The Counter-Electrode - Sames Inocoat Inogun M Instruction Manual

5.2.2. Procedure for mounting the counter-electrode

The Inogun M can be equipped with an optional counter-electrode
• Switch off high voltage,
• Step 1: Unscrew the 2 screws (1 and 2)at the back of
the gun.
• Step 2: Slide the hook towards the front of the gun.
• Step 3: Insert the conductive hook (3), slide it to the
stop and then tighten the 2 KA 30 x 20 screws (4) to
a torque of 0.65 N.m.
• Step 4: Place the counter-electrode (1) on the nozzle
nut of the gun and slide it until the banana plug (2) is
in contact with the conductive hook (3).
• Switch on high voltage.
(see § 8.5 page
1
1
22
DRT7132
D - 2022 /09
56).
2
2 3 4
Member of Exel group