Guarantee - Sames Inocoat Inogun M Instruction Manual

1.8. Guarantee

Under the guarantee, which applies only to the buyer, Sames agrees to repair operating faults resulting from a
design fault, materials or manufacture, under the conditions set out below.
The guarantee claim must define the exact nature of the fault concerned, in writing.
The Sames guarantee only covers equipment that has been serviced and cleaned according to standard procedures
and our own instructions, that has been fitted with parts approved by Sames or that has not been modified by the
customer.
More precisely, the guarantee does not cover damage resulting from:
• the customer's negligence or inattention,
• incorrect use,
• failure to follow procedures,
• use of a control system not designed by Sames or a Sames control system modified by a third party without
written permission from an authorized Sames technical agent,
• accidents such as: collision with external objects, or similar events,
• flooding, earthquake, fire or similar events,
• use of seals not complying with Sames recommendations,
• pollution of air circuits by fluids or substances other than air.
The Sames guns type Inogun M / M + are covered by a warranty (refer to the general sales conditions for its
application).
The guarantee does not apply to wearing parts such as electrode supports, deflectors, powder tube, seals, etc...
The guarantee will take effect from the date of the first start-up or of the provisional acceptance report.
Under no circumstances, either in the context of this guarantee or in other contexts, will Sames be held responsible
for physical injury or intangible damage, damage to brand image and loss of production resulting directly from its
products.
13
DRT7132
D - 2022 /09
Member of Exel group