Table of Contents
Advertisement
Operation
Cleaning the combination steam
oven after a cooking process
Remove the water container and con-
densate container and empty them as
required.
Switch the combination steam oven
off.
Appliance rinsing
appears after a cooking
process involving steam.
Follow the instructions on the display.
The rinsing process should be car-
ried out every time to flush any re-
maining food deposits out of the sys-
tem.
If you have selected
Touch
|
Off
in the settings menu, you
will have to switch the combination
steam oven on in order to open the
door.
Clean and dry the whole combination
steam oven as described in "Cleaning
and care".
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the con-
tainer with fresh water.
Take out the water container and re-
plenish the water.
Push the water container into the ap-
pliance.
The cooking programme is resumed.
54
|
Display
Quick-
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the sensor control to
change the values or settings for this
programme.
Select the sensor control.
Depending on the function, the follow-
ing settings appear:
-
Temperature
-
Moisture
-
Duration
-
Booster
-
Pre-heat
-
Crisp function
Changing values and settings
Select the desired value or setting
and confirm with OK.
Change the value or setting and con-
firm with OK.
The cooking programme will restart with
the new values and settings.
Advertisement
Table of Contents
