Automatic Rinsing; Safety - Miele DGC 7440 HCX Pro Operating And Installation Instructions

Automatic rinsing

Following a cooking process with
steam, Appliance rinsing
the display after the combination steam
oven has been switched off.
This process flushes any remaining
food deposits out of the system.
You can activate or deactivate the auto-
matic rinsing process.

Safety

Sensor lock
The sensor lock prevents the cooking
programme being switched off by mis-
take or settings being changed. Apart
from the  On/Off sensor control, the
activated sensor lock prevents the
sensor controls and fields in the display
from working a few seconds after a pro-
gramme has been started.
- On
The sensor lock is activated. Touch
the OK sensor control for at least
6 seconds to deactivate the sensor
lock for a short period of time.
- Off
The sensor lock is deactivated. All
sensor controls react to touch as nor-
mal.
will appear on
System lock 
The system lock prevents the combina-
tion steam oven from being switched on
by mistake.
The minute minder and the MobileStart
function can still be used when the sys-
tem lock is active.
The system lock will remain activated
even after a mains outage.
- On
The system lock has been activated.
Before you can use the combination
steam oven, touch the OK sensor
control for at least 6 seconds.
- Off
The system lock is deactivated. You
can use the combination steam oven
as normal.
Settings
43