Changing Values And Settings For A Cooking Programme; Changing The Temperature; Setting Cooking Durations - Miele DGC 7150 Operating And Installation Instructions

Operation
Refilling the water
If there is not enough water in the
container while a cooking process
involving moisture is in progress, a
buzzer will sound and the display will
prompt you to refill the container with
fresh water.

Risk of injury caused by hot
steam.
When using a cooking process
involving steam, a lot of hot steam
can escape if the door is opened.
The steam can cause burns.
Step back and wait until the hot
steam has dissipated.
 Fill a suitable container with the
required amount of fresh water and
follow the instructions on the display
(see "Operation – Drawing in water").
The heating-up phase restarts and the
cooking process is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
-
Temperature
- Duration
- Finish at
- Start at
54

Changing the temperature

Select Further  |
Recommended temps.
reset the recommended temperatures
to suit your cooking preferences.
 Select the  or  arrow buttons or
swipe to the right or left in the
       area.
The desired temperature appears in the
display.
 Change the desired temperature via
the navigation area.
The temperature changes in 5 °C steps.
 Confirm with OK.
The cooking programme will restart with
the new desired temperature.

Setting cooking durations

Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
When baking, the cake mixture or
dough can dry out, and the raising
agents can lose their effectiveness.
Select as short as possible a time
until the cooking programme starts.
You have placed the food in the oven
compartment, selected an operating
mode and the required settings such as
the temperature.
By entering
Duration
via the  sensor control, you can
automatically switch the cooking
process off or on and off.
Settings  |
, to permanently
, or
Finish at Start at