Pre-heating the oven compart-
ment
The
Booster
function is used to quickly
pre-heat the oven compartment in
some functions.
The
Pre-heat
function can be used with
any oven function (except
and has to be switched on separately
for each cooking programme.
If you have set a cooking duration, it will
only start to count down after the heat-
ing-up phase.
It is only necessary to pre-heat the oven
in a few instances.
Pre-heat the oven compartment when
cooking the following food:
- Cakes and pastries with a short
cooking duration (approx. 30 minutes
or less) as well as delicate items (e.g.
sponge) with the
heat
function
Booster
The
Booster
function is switched on as
the factory default setting for the follow-
ing functions (
Further
|
):
Booster
On
-
Fan plus
-
Conventional heat
If you set a temperature above 100 °C
and the
Booster
function is switched on,
a rapid heating-up phase heats the
oven to the set temperature. The top
heat/grill element and the ring heater
element come on together with the fan.
Eco Fan heat
Conventional
|
Settings
|
Delicate items (e.g. sponge or bis-
cuits) will brown too quickly on the
top if the
Booster
Switch off the
these items.
Switching the Booster on and off for
)
a cooking programme
If you have selected the
setting, you can switch off the function
separately for a cooking programme.
On the other hand, you can also switch
on the function separately for a cooking
programme if you have selected the
|
setting.
Booster
Off
Example: you have selected a function
and the required settings such as the
temperature.
You want to switch off the
tion for this cooking programme.
Select the sensor control.
Select
Booster
Confirm with OK.
The
Booster
function is switched off dur-
ing the heating-up phase. Only the
heating elements associated with the
function are pre-heating the oven com-
partment.
Operation
function is used.
Booster
function for
Booster
|
Booster
|
Off
.
On
func-
59