Table of Contents
Advertisement
Malfunction due to missing floor fil-
ter.
If the floor filter is missing, food de-
posits can get into the drain. The wa-
ter cannot be pumped away.
Before each cooking programme,
check that the filter in the floor of the
oven compartment is correctly fitted.
Switch the combination steam oven
on.
The main menu will appear.
If you want to cook using a steam op-
erating mode or bursts of steam, fill
the water container and insert it into
the appliance.
Distilled or carbonated water or other
liquids could damage the combina-
tion steam oven.
Only use cold, fresh drinking water
(below 20 °C).
Place the food in the oven compart-
ment.
Select the relevant operating mode.
The operating mode will appear in the
display. Depending on which operating
mode you have selected, the recom-
mended values for temperature and
moisture (if applicable) will appear one
after the other.
Change the recommended temperat-
ure if necessary.
Confirm with OK.
The recommended temperature will be
accepted within a few seconds. You
can change the temperature sub-
sequently via the arrow button.
Change the moisture setting if neces-
sary.
Confirm with OK.
The required and the actual temperature
will appear and the heating-up phase
will begin.
You will see the temperature increasing.
A buzzer will sound when the set tem-
perature is reached for the first time.
After cooking, select the sensor con-
trol for the selected operating mode
to end the cooking process.
Risk of injury caused by hot
steam.
When using a cooking process in-
volving steam, a lot of hot steam can
escape if the door is opened. The
steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Take the food out of the oven com-
partment.
Risk of injury caused by hot sur-
faces.
The combination steam oven gets
hot during operation. You can burn
yourself on the door glass.
Wear oven gloves when closing the
hot door.
Operation
53
Advertisement
Table of Contents
