Table of Contents
Advertisement
Operation
Refilling the water
If, during a cooking process using
moisture, there is too little water in the
water container, a tone will sound and a
message will appear to prompt you to
fill the container with fresh tap water.
Risk of injury due to hot steam.
When using a cooking programme
involving steam, a lot of hot steam
can escape if the door is opened.
The steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Fill a suitable container with the
required amount of fresh tap water
and follow the instructions in the
display (see "Operating principles –
Drawing in water").
The heating-up phase restarts and the
cooking process continues.
54
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
-
Temperature
-
Duration
-
Finish at
-
Start at
Changing the temperature
You can permanently reset the
recommended temperature to suit
your cooking preferences by selecting
|
Other
Settings
temps
.
Select the or arrow sensor or
swipe to the right or left in the
area.
The target temperature appears in the
display.
Change the target temperature via the
navigation area.
The temperature changes in 5 °C steps.
Confirm with OK.
The cooking programme will restart with
the new target temperature.
|
Recommended
Advertisement
Table of Contents
