Table of Contents
Advertisement
Problem solving guide
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Messages on the display
Problem
F10
F11
F20
F32
F55
152
Cause and remedy
The suction hose in the water container is not inser-
ted correctly or not vertical.
Correct the position of the suction hose:
The drain hoses are blocked.
Descale the combination steam oven (see "Clean-
ing and care" – "Care").
If the fault message appears again, contact the
Miele Customer Service Department.
The door has not locked for cleaning with
Switch the combination steam oven off and back
on again.
If the fault message appears again, contact the
Miele Customer Service Department.
The maximum operating time for an operating mode
has been exceeded and the auto switch off has been
triggered.
Switch the combination steam oven off and back
on again.
The combination steam oven is ready to use again
immediately.
HydroClean
.
Advertisement
Table of Contents
