JETWAY MM10-H6100 Technical Manual page 39

Primary Display
Use this item to select which of graphics device should be Primary Display.
The optional settings are: [Auto]; [IGFX]; [PEG Slot]; [PCH PCIE]
Internal Graphics
Use this item to keep IGFX enabled based on the setup options.
The optional settings are: [Auto]; [Disable]; [Enable].
Aperture Size
Use this item to select the Aperture Size. Above 4GB MMIO BIOS assignment is
automatically enabled when selecting 2048MB aperture. To use this feature,
please disable CSM Support.
The optional settings are: [128MB]; [256MB]; [512MB]; [1024MB].
DVMT Pre-allocated
Use this item to select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device.
The optional settings are: [32M]; [64M]; [128M]
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 Total Graphic Memory size used by the Internal
Graphics Device.
The optional settings are: [128M]; [256M]; [MAX].
► VMD setup menu
Enable VMD controller
Use this item to enable/disable to VMD controller
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Enable VMD Global Mapping
Use this item to enable/disable to VMD controller
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear
Map this Root Port under VMD
Use this item toMap/UnMapthis Root Port to VMD
The optional settings: [Disabled]; [Enabled].
► PCH-IO Configuration
HD Audio
This item controls detection of the HD-Audio device.
The optional settings are: [Disabled]; [Enabled].
[Disabled]: HDA will be unconditionally disabled.
[Enabled]: HAD will be unconditionally enabled.
Onboard Lan1 Controller
Use this item to enable or disable onboard NIC.
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Wake on LAN Enable
Use this item to enable/disable integrated LAN to wake the system
The optional settings are: [Disabled]; [Enabled].
Onboard Lan3 Controller
Use this item to control the PCI Express Root Port.
The optional settings are: [Disabled]; [Enabled].
35