Connectors And Headers; Rear I/O Back Panel Connectors - JETWAY MM10-H6100 Technical Manual

JP4 (2-pin): GPIO/80 PORT MODE Select Pitch2.0mm
2-2 Connector and Headers

2-2-1 Rear I/O Back Panel Connectors

*Refer to Page-2 Rear IO Diagram
Icon
JP4
Name
Mainly for user to connect external MODEM or other
Serial Port
devices that supports Serial Communications Interface.
HDMI 2.0 Port
To connect display device that support HDMI specification.
To the system to corresponding display device with
Display 1.4 Port
compatible display port cable.
This connector is standard RJ-45 LAN jack for Network
RJ-45 LAN Port
connection. These two RJ-45 LAN port from UL1 and UL2
support 1.0GbE transfer rate.
This connector is standard RJ-45 LAN jack for Network
connection. These two RJ-45 LAN port from UL3 support
RJ-45 LAN Port 2.5GbE transfer rate. (MM10-Q6700/6702 only)
(*Note: 2.5Gbps is only supported with CAT5e UTP
cable).
To connect USB keyboard, mouse or other devices
USB 3.2 (Gen.2)
compatible with USB 3.2(Gen.2) specification. Ports
Port
support up to 10Gbps data transfer rate.
To connect USB keyboard, mouse or other devices
USB 2.0 Port
compatible with USB 2.0 specification. Ports support up to
480Mbps data transfer rate.
Function
10