JETWAY MM10-H6100 Technical Manual page 28

 Connectivity Configuration
Use this item to configure connectivity related options
Press [Enter] to make settings for the following sub-items:
CNVi Mode
This item configures connectivity.
The optional settings: [Disable Integrated]; [Auto Detection].
[Disable Integrated]: it disables Integrated Solution.
[Auto Detection]: if discrete solution is discovered it will be enabled by default.
Otherwise integrated solution (CNVi) will be enabled.
 CPU Configuration
Press [Enter] to view current CPU configuration and make settings for the
following sub-items:
Hyper-Threading
Use this item to enable or disable Hyper-Threading Technology.
The optional settings: [Disabled]; [Enabled].
Intel (VMX) Virtualization Technology
Use this item to When [Enabled], a VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
The optional settings: [Disabled]; [Enabled].
Intel® SpeedStep(tm)
This item allows more than two frequency ranges to be supported.
The optional settings: [Disabled]; [Enabled].
C states
Use this item to enable or disable CPU Power Management.
When set as [Enabled], it allows CPU to go to C states when it's not 100% utilized.
The optional settings: [Disabled]; [Enabled].
Turbo Mode
Use this item to enable or disable Turbo Mode (requites Intel speed step or Intel
speed shift to be available and enabled).
The optional settings: [Disabled]; [Enabled].
 SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Controller(s)
Use this item to enable of disable SATA device.
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], the following items shall appear:
M.2
Port
Use this item to enable or disable M.2 SATA port.
The optional settings: [Disabled]; [Enabled].
SATA2
Port
Use this item to enable or disable SATA port.
24