JETWAY MM10-H6100 Technical Manual page 32

Only Disable ERP Function
The optional settings are: [Disabled]; [Enabled].
PCIE Wake-up from S3-S5
The optional settings are: [Disabled]; [Enabled].
USB S3/S4 Wake-up
Use this item to enable or disable USB wake-up from S3/S4 state.
*This function is supported when 'ERP Support' is set as [Disabled].
The optional settings are: [Enabled]; [Disabled].
USB S5 Power
Use this item to enable or disable USB power after power shutdown.
*This function is supported when 'ERP Support' is set as [Disabled].
The optional settings are: [Enabled]; [Disabled].
 Super IO Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
ERP Support
Use this item to Energy-Related Products function. Disable ERP to active all
wake-up functions
The optional settings are: [Disabled]; [Auto].
► Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings are: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in the following items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=3F8h; IRQ=4]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11].
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485].
Mode Speed Select
The optional settings are: [RS232/RS422/RS485=250kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].
► Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings are: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in the following items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=2F8h; IRQ=3]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11].
28