JETWAY MM10-H6100 Technical Manual page 30

MAC Pass Through
Use item to enable/disable MAC Pass Through. Function
The optional settings are: [Disabled]; [Enabled].
Activate Remote Assistance Process
Use this item to trigger CIRA boot.
*Note: Network Access must be activated first from MEBx Setup.
The optional settings are: [Disabled]; [Enabled].
Unconfigure ME
Unconfigure ME with tesetting MEBx password to defsult on next boot.
The optional settings are: [Disabled]; [Enabled].
 ASF Configuration
This item is for user to configure Alert Standard Format parameters.
Press [Enter] to make settings for in the following sub-items:
PET Progress
Use this item to enable or disable PET Events Progress to receive PET Events.
The optional settings are: [Disabled]; [Enabled].
WatchDog
Use this item to enable or disable WatchDog Timer. When set as [Enabled], the
following sub-items shall appear:
OS Timer
Use this item to set OS watch dog timer.
BIOS Timer
Use this item to set BIOS watch dog timer.
ASF Sensors Table
Use this item to add ASF Sensor Table into ASF ! ACPI Table.
The optional settings are: [Disabled]; [Enabled].
 Secure Erase Configuration
Press [Enter] to make settings for in the following sub-items:
Secure Erase Mode
Use this item to change Secure Erase module behavior:
The optional settings are: [Simulated]; [Real].
[Simulated]: Performs SE flow without erasing SSD;
[Real]: Erase SSD.
*** If SATA device is used, OEM Could use
SECURE_ERASE_HOOK_PROTOCOL to remove SATA power to skip G3 cycle.
***
Force Secure Erase
Use this item to Force Secure Erase on next boot
The optional settings are: [Disabled]; [Enabled]
 Trusted Computing
Press [Enter] to view current status information, or make further settings in the
following sub-items:
Security Device Support
Use this item to enable or disable BIOS support for security device. O.S. will not
show security device. TGG EFI protocol and INT1A interface will not be available.
The optional settings are: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in the following items:
26