JETWAY MM10-H6100 Technical Manual page 31

Active PCR banks
Available PCR banks
SHA256 PCR Bank
Use this item to enable or disable SHA256 PCR Bank
The optional settings are: [Disabled]; [Enabled].
SHA384 PCR Bank
Use this item to enable or disable SHA384 PCR Bank
The optional settings are: [Disabled]; [Enabled].
SM3_256 PCR Bank
Use this item to enable or disable SM3_256 PCR Bank
The optional settings are: [Disabled]; [Enabled].
Pending operation
Use this item to schedule an operation for the security device
Note: Your computer will reboot during restart in order to change state of security
device.
The optional settings are: [None]; [TPM Clear].
 ACPI Settings
Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
 Wake-up Function Settings
Press [Enter] to make settings for the following sub-items:
Wake-up System With Fixed Time
Use this item to enable or disable system wake on alarm event.
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following items shall appear:
Wake-up Hour
Use this item to select in the range of 0 to 23. For example enter 3 for 3am and
15 for 3pm.
Wake-up Minute
Use this item to select in the range of 0 to 59.
Wake-up Second
Use this item to select in the range of 0 to 59.
When set as [Disabled], the Wake-up System With Fixed Time following items
shall appear:
Wake-up System With Dynamic Time
Use this item to enable or disable system wake on alarm event.
System will wake on the current time + Increased minutes.
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the current time + increased
minute(s)
Wake-up Minute Increase
Use this item to 1-60
PS2 KB/MS Wake-up
Use this item to enable or disable PS2 KB/MS Wake-up from (S3/S4/S5) Support
27