Additional Functions; Door Interphone - Gigaset Fusion Manual

Door interphone

Door interphone
The telephone can operate a door interphone.
For door interphone authentication, you need the device SIP password and user
name and the DTMF code to open the door.
Setting up a door interphone
The door interphone must be entered as a SIP device in the list of telephones. Not all the param-
eters relevant for SIP phones are relevant for door interphones.
In Web user interface
Settings
Select the SIP Device device type
Device Name
Internal phone number /
Username
Authentication pass-
word / SIP username
Enable the door interphone with the switch (
DTMF code (open door)
Username / Password
If the door interphone has a camera:
Camera (URL)
Picture refresh time
Next . . . The Number assignment and MWI Assignment screens are not relevant for door
interphones Skip these with Next
The settings are displayed again. Complete set-up:
Only cameras that support the motion JPEG (mjpeg) image format are supported.
58

Additional functions

Telephony Phone devices
Next
Enter the door interphone name in the network
Select the internal number for the door interphone
Enter the device SIP password and user name
The DTMF code is sent from the phone to the door interphone to
open the door.
Enter the DTMF code for the door interphone
Enter the access data for access to the door interphone video
stream (if required)
Enter the camera URL
Enter time interval for refreshing the camera image
Unit: fps (frames per second)
Add . . . The device wizard is started
= enabled) Next
Finish