Gigaset Fusion Manual page 60

DECT handsets
Swapping a DECT handset
Replace a handset with another one if a handset is to be swapped. All settings linked to the first
handset will be maintained, only the DECT registration will change.
This function is also helpful if you have installed a backup file, as some settings cannot be copied
across when backing up the system (DECT registration, Bluetooth registration, Google/Microsoft
accounts, Gigaset account for Smart Home).
In Web user interface
Settings
click Replace device . . . The DECT replace wizard is opened, a registration process
starts
Register new DECT handset
The following settings will be made: Name, internal number, numbers for outgoing and
incoming calls, MWI assignment for an answer machine.
DECT settings
Enabling/disabling ECO DECT
The device range is set to maximum by default. This guarantees the best connection between
handset and base. In idle mode, the handset does not transmit (it is radiation-free). Only the base
maintains contact with the handset using weak wireless signals. During a call, the transmit
power automatically adapts to the distance between base and handset. The shorter the distance
to the base, the lower the radiation.
Further reduce radiation:
Eco mode: Reduce radiation by up to 80%.
If ECO mode is switched on, the range is reduced by approx. 50%.
Eco mode +: Deactivate radiation in idle mode.
The ECO DECT functions cannot be enabled if Smart Home is in use.
In display menu
Settings
with the switch (
In Web user interface
Settings
Mode+ Enable/disable with the switch (
60
Telephony Phone devices
Finish
Telephony
= enabled)
Telephony Advanced settings
DECT handsets
Dect Eco mode/Eco mode + Enable/disable
DECT settings
= enabled)
Next to the handset,
Eco Mode/Eco