Gigaset Fusion Manual page 35

Setting up Call divert rules
(Only for Admin user role)
You can set up Call divert rules for multiple devices, connections and call groups. If a Call divert
rule is enabled, an incoming call will be handled immediately according to the rule and not
forwarded to the relevant terminals.
In Web user interface
Settings
listed Add rule . . . The wizard for setting up Call divert rules is started
or: Wizards
Enter rule name
Scheduled
Manual
For Scheduled mode:
Add days Select day
period and set a precise start and end time if required
Next
Drag devices, groups and connections (numbers) to which this rule is to apply from the
Available devices and numbers list up to the Active Devices and Numbers list
Set mode and destination for Call divert
Announcement &
Number
Announcement
Number
Next . . . The settings are displayed again
Telephony Call diverts
Call divert rule
Select enable mode
Call divert is switched on and off automatically at set times
Call divert is switched on and off manually when required.
Setting up a schedule
Set time period with timeline
The caller hears an announcement and is then diverted to a number.
Select the required announcement from the list.
Select the name/internal number of a telephone, call group or
answer machine or enter External Number
The caller hears an announcement and then the connection is ended.
Select the required announcement from the list.
The call is diverted to another internal or external number.
Select the name/internal number of a telephone, call group or
answer machine or enter External Number
Call divert rules . . . The existing rules are
Click on the selected time
Add more days if required
Finish
Call divert
Next
35