Gigaset Fusion Manual page 16

Getting to know your telephone
Call divert
Enables call divert set up beforehand for the connection.
Select the Select line for which call divert is set up
FAC
(Function Access Code) The key sends a code to the phone system or provider to enable/
disable a function or service.
Enter the codes to enable and disable the service.
Example: *71 Call divert enabled, *071 Call divert disabled
Select LED Colour
The LED shows the following statuses for Default setting:
Green The service is enabled.
Red The service is not enabled.
DTMF
(Dual Tone Multifrequency)
Assigns the function key a number dialled using DTMF. This is used for example for querying
network mailboxes using digit codes, for controlling dialogue systems (IVR) and for dialling
into a conference call by entering a PIN.
Enter the number to be dialled using DTMF signalling.
Next call anonymous
If the function is enabled, the next call is made anonymously.
Select LED Colour
The LED shows the following statuses for Default setting:
Orange The function is activated.
Grey The function is not activated.
SIP URI
Assigns the function key a SIP URI (Internet phone number in SIP notation).
Enter the SIP URI (e.g. sip:Susan.Brown@211.122.10.15)
Action URL
Assigns an Action URL to the function key. An Action URL is used by the phone to communi-
cate with a Web server application.
Enter the URL in the text field
PBX feature
Assigns a PABX function to the function key.
Select action
Placing widgets on the display
Widget From the Widget list, select the required widget
Call diverts
Displays the call divert rules configured in the Web user interface.
Size: 4x4
Actions: Enable/disable call divert (
16
Save
= enabled)