Gigaset Fusion Manual page 29

Anonymous calling
If you enable the function, your number will not be displayed for the caller.
If the provider supports this function, this also applies to external calls.
In display menu
Settings
will see a list of set-up telephones
device with the switch (
Accepting a call
An incoming call is indicated by ringing, by a display on the screen and by the flashing handsfree
key.
The display shows
•
the caller's name if it has been stored in the directory
•
the caller's number if it has been sent
•
the line on which the call is coming in on
Accepting the call:
Switch the ringtone off:
Rejecting the call:
When a call comes in, the system looks for a matching entry in the local directory. If
the number is not found there, other directories are searched, if any have been
configured.
Protection against unwanted calls
Activating/deactivating the ringtone
An incoming call is not signalled by ringing, but is displayed on the screen.
Switching the ringtone on/off:
Switch on an alert tone (beep) instead of the ringtone:
Press and hold the Star key
Ringtone is switched off: the
Ringtone is switched off and alert tone is switched on: the
Telephony
Enable/disable withheld number function for each
= enabled)
Lift the handset
or: Accept . . . The call is accepted using the handsfree function
Silence
Reject
Press and hold the Star key
Use beep sound
icon appears on the display
Call settings . . . Under Anonymous calls you
icon appears on the display
Making calls
29