Gigaset Fusion Manual page 75

Changing settings for your own device
In Web user interface0
Settings
settings as required
Setting Message configuration
(MWI = Message Waiting Indicator)
If the function is enabled, the Message key
Set which answer machine you will receive indications for via the Message key if a new voice
message is received. You can create this setting for your own device, SIP phones and DECT
handsets. All answer machines can be assigned to Gigaset Fusion. For other SIP phones and
DECT handsets, only one answer machine can be configured for MWI.
In Web user interface
Settings
SIP phone or a DECT handset, click
are listed under Message configuration
Own device
SIP devices and DECT
handsets:
Set up call groups
A call group comprises multiple phones that have been assigned the same numbers. An
incoming call to one of these numbers can be accepted on all the devices in the call group.
Call groups can be set up with different call behaviours:
Linear Initially, the call is signalled on the first device. If the call is not accepted, the
next device in the group is called and so on.
Parallel The call is signalled on all devices in the call group. The first participant who lifts
the handset takes the call.
In display menu
Settings
are listed with names and internal numbers
Add new group:
Add new . . . The Devices & Groups wizard is opened
name for the group
tered phones are listed
( = selected)
Next . . . All registered connections are listed
( = selected)
Telephony Phone devices
Save
Telephony Phone devices
. . . The local answer machines and network mailboxes
Enable/disable answer machine (
If required, select another answer machine or No selection
( = selected)
Telephony
Select internal number
Select the devices to be included in the call group
Next Use to set the order of the devices for linear call behaviour
Next . . . The settings for the call group are displayed again
Next to Own device click
flashes when a new voice message is received.
Next to the entry for your own device, a
= enabled)
Devices . . . If there are already call groups, they
Select Group
Select call behaviour
Select connections for the call group
Telephony
Change
Next Enter a
Next . . . All regis-
Finish
75