Gigaset Fusion Manual page 10

Setting a name for the telephone
Delete existing text
Close the virtual keyboard using the small keyboard icon on the bottom right.
Internal numbers between 10 and 35 can be assigned by default.
Changing internal number range:
Check the check box
number range in the from and to fields
Valid values: maximum of 100 numbers between 0 and 9999, default: 10
Next
Selecting network connection
The telephone can be connected to the network over LAN or WLAN.
LAN configuration
Select LAN ( = selected)
The IP configuration of the telephone is carried out automatically by default. You connect the
telephone to the network (for example, using a router), the IP address is assigned automatically
and further network settings are adopted. The IP address is displayed
If you need a different configuration for your network:
Manual configuration
field, enter the IP address for Gigaset Fusion
IP address of the standard gateway in the network
subnet mask for the network
If a connection to the network is established over a proxy server:
Enable Proxy settings (
of the proxy server
Next
Ensure that you enter the correct information that matches your network settings
during manual configuration. If the information is incorrect, it may mean the device
and Web user interface become inaccessible. In this case, you would have to carry
out a hardware reset to default settings on the device.
WLAN configuration
Select Wi-Fi ( = selected)
required WLAN
phone is connected to the WLAN
10
Enter required name
next to Customize Internal number range
Next
From the IP address type list, select static
= enabled)
In the Proxy port field, enter the port number of the proxy server
Next . . . The WLANs in range are displayed
Next Enter the LAN password for your network
In the Standard gateway field, enter the
In the Subnet mask field, enter the
In the Proxy server field, enter the IP address
Enter the required
In the IP address
Select the
Next . . . The tele-