Gigaset Fusion Manual page 32

Making calls
Two simultaneous incoming calls
When there are two simultaneous incoming calls, both are shown on the display. One call is
shown enlarged on the display, an element with the number or name is shown on the top left
for the second call.
Accepting the first call:
Accepting the other call:
The call not taken is handled as a waiting call.
Consultation calls
You are conducting a call and want to call another participant.
Hold . . . The current call is put on hold, an element with the number or name is shown in the
top left of the display, the participant hears on-hold music
Initiate consultation call using the keypad, directory, call list or a function key . . . The second
participant is called
resumed
Call swapping
Switch back and forth between two participants. The other call is placed on hold.
During an external call, dial the number of a second participant (consultation call) or accept
a call waiting . . . The first call is put on hold
To switch between the participants:
End call swapping:
or: Replace the handset . . . The two other participants are connected to each
other.
or: The active participant ends the call . . . The connection to the participant on hold is
reactivated
or: The participant on hold ends the call . . . The connection to the active participant
remains active
Conference call
Speaking to multiple participants at the same time. You are conducting a call while a second
participant is being held.
Tap the call on hold
Add more participants:
Removing participants:
Ending a conference call:
32
Lift the handset
Tap the element for the second call
Conduct call and end . . . The connection to the first participant is
Tap the call on hold
Hangup . . . The active call is ended, the call on hold is activated
Conference . . . All participants are connected to each other
Add . . . Both participants are put on hold
. . . As soon as the call is accepted, the participant will be added to
the conference call
Tap
Hangup
Lift the handset
Resume
Call more participants