Gigaset Fusion Manual page 77

In Web user interface
Settings
are listed with the following information:
Name
Provider
Phone numbers
Status
Activation
Registration status is updated dynamically.
If all data was entered correctly, it may take three to ten seconds before a line is
displayed as Registered.
Adding a new connection
Gigaset makes provider profiles available for setting up VoIP connections, with suitable basic
parameters set for a provider. All you have to do is enter the access data. If there is no profile for
your provider, you can set up configuration manually.
To set up connections, use the SIP Connection wizard.
You need the access data of an IP telephony provider (user name, registration name,
password etc.).
In display menu
Wizards
or:
In Web user interface
Wizards SIP Connection
or: Settings
The wizard guides you step-by-step through all necessary configuration steps.
Editing/deleting connections
In Web user interface
Settings
listed
Edit connection:
Delete connection:
Telephony Connections . . . Connections that have already been set up
Connection name
Phone provider making the connection available
Numbers available for the connection
Connection status (Registered/Not registered)
/ = the connection is disabled/enabled
If you temporarily do not need a connection, you can disable it.
VoIP Connections
Settings Telephony
Telephony
Telephony Connections . . . The connections that have been set up are
Next to the entry
Next to the entry,
Connections
Connections Add
click Make changes
click Confirm with Ok
Telephony
Add
Save
77